83
Figure 4-11
4.4.2 PTZ Control
The PTZ setup is shown as in See Figure 4-12.
Please note the commend name is grey once device does not support this function.
The PTZ operation is only valid in one-window mode.
Here you can control PTZ direction, speed, zoom, focus, iris, preset, tour, scan, pattern aux function,
light and wiper, rotation and etc.
Speed is to control PTZ movement speed. The value ranges from 1 to 8.The speed 8 is faster than
speed 1. You can use the remote control to click the small keyboard to set.
You can click
and
of the zoom, focus and iris to zoom in/out, definition and brightness.
The PTZ rotation supports 8 directions. If you are using direction buttons on the front panel, there are
only four directions: up/down/left/right.
Figure 4-12
In the middle of the eight direction arrows, there is a 3D intelligent positioning key. See Figure 4-13.
Please make sure your protocol supports this function and you need to use mouse to control.
Click this key, system goes back to the single screen mode. Drag the mouse in the screen to adjust
section size. The dragged zone supports 4X to 16X speeds. It can realize PTZ automatically. The
smaller zone you dragged, the higher the speed.
Figure 4-13
Name
Function
function
Shortcut
Function
function
Shortcut
Summary of Contents for ME-1080-V2
Page 1: ...HDCVI Series DVR ME 1080 V2 User s Manual Version 1 0 0 Our units do not support PAL ...
Page 144: ...135 Figure 4 80 Figure 4 81 ...
Page 195: ...186 Figure 5 47 Figure 5 48 Figure 5 49 ...
Page 232: ...223 Maxtor DiamondMax 20 STM3320820AS 320G SATA Maxtor DiamondMax 20 STM3250820AS 250G SATA ...
