175
Figure 5-26
5.8.2.6 DDNS
The DDNS interface is shown as in Figure 5-27.
The DDNS is to set to connect the various servers so that you can access the system via the server.
Please go to the corresponding service website to apply a domain name and then access the system via
the domain. It works even your IP address has changed.
Please select DDNS from the dropdown list (Multiple choices). Before you use this function, please
make sure your purchased device support current function.
Figure 5-27
Please refer to the following sheet for detailed information.
Parameter
Function
Server Type
You can select DDNS protocol from the dropdown list and then
enable DDNS function.
Server IP
DDNS server IP address
Server Port
DDNS server port.
Domain Name
Your self-defined domain name.
User
The user name you input to log in the server.
Password
The password you input to log in the server.
Update period
Device sends out alive signal to the server regularly.
You can set interval value between the device and DDNS server
here.
Quick DDNS and Client-end Introduction
1) Background Introduction
Device IP is not fixed if you use ADSL to login the network. The DDNS function allows you to access the
DVR via the registered domain name. Besides the general DDNS, the quick DDNS works with the
device from the manufacturer so that it can add the extension function.
2) Function Introduction
The quick DDNS client has the same function as other DDNS client end. It realizes the bonding of the
domain name and the IP address. Right now, current DDNS server is for our own devices only. You
Summary of Contents for ME-1080-V2
Page 1: ...HDCVI Series DVR ME 1080 V2 User s Manual Version 1 0 0 Our units do not support PAL ...
Page 144: ...135 Figure 4 80 Figure 4 81 ...
Page 195: ...186 Figure 5 47 Figure 5 48 Figure 5 49 ...
Page 232: ...223 Maxtor DiamondMax 20 STM3320820AS 320G SATA Maxtor DiamondMax 20 STM3250820AS 250G SATA ...
