background image

1

 

General Introduction 

1.1

 

Overview 

This series HDCVI camera conforms to the HDCVI standard. It supports video signal high-

speed long distance transmission without any delay. It can be controlled by the HCVR 

conforming to the HDCVI.  

1.2

 

Features 

Adopt high performance CMOS image sensor, megapixel definition.

Support coaxial transmission of HD video, audio and control signal.

For 720P series, it supports RG59 coaxial transmission without any loss, the distance is

over 800m, for 1080P series, it supports RG59 coaxial transmission without any loss, the

distance is over 500m.

High speed, long distance real-time transmission.

Support HD/SD video output. (some devices only support HD video output)

Support OSD menu adjusting parameters.

Support auto exposure, AWB, auto electronic gain.

Support true WDR function, the range can reach 120dB (only supported by WDR models)

Support DC 12V power supply.

Pinhole cameras can be applied to covert places such as ATM; mobile cameras can be

applied to places such as bus, school bus and subway etc.

2

 

Device Structure 

2.1

 

Dimension 

 

Refer to Figure 2-6 for the dimension. The unit is mm. 

Figure 2-6

Summary of Contents for HDCV-ELE2MB28











Reviews: