3
500-33705, Rev A
Product Information
Holding Force
1200 lbs (544 Kg)
Dimensions (L x W x H)
10-1/2
” x 2-7/8” x 1-9/16” [266 mm x 72 mm x 40 mm]
Electrical
NOTE:
Factory default setting is 24 VDC.
12 VDC and 24 VDC operation (field selectable via voltage selection
switch in the wiring compartment)
Product Type
NOTE 1:
The V2M1200/1290 Series with Magnetic Bond Sensor
(MBS) uses a hall-effect sensor.
NOTE 2:
The V2M1200/1290 Series with Door Position Switch (DPS)
uses a change-over reed switch sensor.
Besides the unmonitored version, the V2M1200/1290 Series Maglock is
available with either a MBS, a DPS, or both.
LED Operation Colors for V2M1200/1290 with MBS
The LED operation color can be set in the field. Colors can be reversed
by reversing the two-pin plug connection on the Printed Circuit Board
(PCB). The factory default setting is as follows:
LED indicator OFF
No power to the magnet
LED indicator RED
Power on magnet, door open
LED indicator GREEN
Power on magnet, door closed
Recommended Tools
Screwdriver, #2 Phillips
Center Punch
Drill
Drill Bit:
15/32” [12 mm], 5/8” [16 mm],
Tap: ¼
”-20 UNC [M6-1.0]
