Securifi Almond2015, Setup Manual, Page: 5 / 5

Adding Auto Arm/Disarm Rules
S T E P 7 (OPTIONAL)
Note: To be able to enable automatic detection of your presence at home,you should be using Almond 2015
as your primary Internet router.
Connect your phone to your Almond 2015 wifi network and open the Almond App.
Tap on the on the top right of the screen and select “Switch to Local Connection”
Scenes Sensors Router Rules
Now tap on the “Rules” tab at the bottom of the page
and press on the
icon to add a new rule.
Select your mobile(or any device to
sense your presence) from the list of
devices joining the network as a trigger.
Tap on “Then” and set the Mode as “Home”.
Give it a name. Save the Rule.
Select your mobile(or any device to
sense your presence) from the list of
devices joining the network as a
trigger.
Tap on “Then” and set the mode as “Home”.
Give it a name. Save the Rule.
Congrats!
Now you have successfully set up and are all set to use your Securifi Home Alert System!
IF THEN
AWAY HOME
1
Hue Lamp Mode Living Room
IF THEN
Matt’s Phone
ACTIVE
ACTIVE INACTIVE
INACTIVE
BinarySwitch Network devices
IF THEN
Matt’s Phone
ACTIVE
ACTIVE INACTIVE
INACTIVE
BinarySwitch Network devices
IF THEN
AWAY HOME
1
Hue Lamp Mode Living Room
1
2
3
4
5
6
7