Setting up the door/window sensors
S T E P 4
Remove the back of the sensor by Pushing in the oval button at the top of the device, releasing the back from
the unit.
Insert the included battery, noting the c and - polarity.
Tap the “Add Sensor” icon on the Almond touchscreen and press the “Add” button on the screen.
Now tap and quickly release the sensor’s “Join/Reset” button as shown and the sensor should be added to your
Almond. The LED will flash to indicate that the sensor is being added.
Reattach the rear cover of the sensor and make sure it snaps in place properly.
On the Almond touchscreen, return to the “Home” screen, tap the “Connected Sensors” icon, and tap the
sensor you’ve just added. Press the “Tampered” button to reset the tamper switch. Your sensor should now be
fully operational and ready to be installed at your location of choice.
Add Sensors
Hue
Add
Remove
Remove all Sensors
Zigbee
Adding Sensor...
Please wait
Battery
Tamper switch
Join/Reset button
LED indicator
Remove the back of the sensor by pushing
in the button at the bottom of the sensor.
Insert the battery.
Tap on the “Add Sensors” icon in the LCD
UI of your Almond and tap on “Add” to
start adding the sensor.
S T E P 5
Setting up the Motion Sensor
1
2
3
4
5
6
1
2
3