background image

 
DISCLAIMER

Under no circumstances shall the manufacturer or distributor of the Securview™ be held liable for 
consequential or incidental damages sustained in connection with the use of the Securview™ Rear 
Vision System.  The Securview™ is designed as a safety enhancement device and is in no way intended 
as a replacement for rear-view mirrors, side-view mirrors or physically checking the surroundings when 
backing a vehicle.  Always check surroundings for safety when backing!  Objects on the monitor are 
closer than they appear.  For the best fit, modification of the vehicle license may or may not be 
necessary.  It is the sole responsibility of the vehicle owner to check and verify any and all State or 
Federal Motor vehicle codes with regards to modifications of vehicle license plates.  The manufacturer of 
the Securview™ assumes no liability or responsibility whatsoever with regards modifications of the 
license plate. 
 
 
 

 

 

www.crimestopper.com 
[email protected] 
Phone (800) 998-6880 
FAX (805) 581-9500 
 
© 2011 Crimestopper Security Products 

 

 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

5-11-2011 

Summary of Contents for OEM-6309

Page 1: ...llows it to be mounted in the factory camera location The 170 ultra wide angle Easily snaps into place on the vehicle Parking assist lines to help the driver accurately judge distance behind the vehicle Constructed of high grade plastic Reverse image The OEM cam easily connects with other SecurView products such as any of the LCD monitors It can also be integrated with your existing OEM or afterma...

Page 2: ...the license plate 4 Route the wiring harness into the vehicle There may be an existing factory rubber grommet that you can use to run the wiring into the trunk area If you have to drill a hole make sure to double check behind the drilling location before drilling Once the hole is drilled and the wiring is run into the vehicle seal the edges of the hole with silicon or caulking to prevent moisture ...

Page 3: ...e lights You may also connect power inside the vehicle under the dash or in the trunk The Red power wire goes to Reverse Light 12V and the Black wire to Ground 4 Run the Yellow RCA video cable to the monitor s video input or reverse camera input Connect to 12V Reverse Light MONITOR Chassis Ground RED WIRE BLACK WIRE Connect to Monitor YELLOW OEM 6309 RED POWER CONNECTOR TECH SUPPORT 800 998 6880 S...

Page 4: ...le Always check surroundings for safety when backing Objects on the monitor are closer than they appear For the best fit modification of the vehicle license may or may not be necessary It is the sole responsibility of the vehicle owner to check and verify any and all State or Federal Motor vehicle codes with regards to modifications of vehicle license plates The manufacturer of the Securview assum...

Reviews: