background image

Warranty Terms and Conditions

 

 

 

Your SecureStart™ is covered by a conditional, limited warranty to the original purchaser.  
Your SecureStart™ is warranted to be free from defects in material and workmanship for a 
limited period (as stated on card) from the date of sale.    If your jumpstart unit malfunctions 
or fails within the warranty period because of a defect in material or workmanship, we will 
repair or replace it, at our discretion, without charge.    You must present a sales invoice or 
receipt to prove the date of purchase.    If the warranty seal sticker is damaged, the warranty 
shall be voided. 

Returned units determined to have been subjected to misuse shall not be covered under 
warranty.    This warranty does not cover defects or failures of your SecureStart™ due to any 
cause other than defective manufacturer’s material or workmanship, including without 
limitation any malfunctions or failures caused by repairs made by an unauthorized person, 
mishandling, modifications, normal wear, unreasonable use or damage.  IN NO EVENT 
SHALL THE MANUFACTURER BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL 
DAMAGES. 

EXCEPT FOR THIS LIMITED WARRANTY, THE MANUFACTURER HAS NOT MADE, AND 
SPECIFICALLY DISCLAIMS, ANY WARRANTY OR REPRESENTATION OF ANY KIND, 
EXPRESS OR IMPLIED, DIRECT OR INDIRECT, OF PRODUCT FITNESS FOR A 
PARTICULAR PURPOSE.  THIS LIMITED, CONDITIONAL WARRANTY PROVIDES THE 
EXCLUSIVE REMEDY FOR ANY CLAIM OR DAMAGE EXCEPT AS OTHERWISE 
REQUIRED BY LAW. 

 

 

IMPORTANT 

Read All Instructions And Safety Warnings 

Before Using SecureStart™ 

 

Warning / Safety Information 

 

 

1. 

Read and follow all instructions in this manual before using the SecureStart™. 

2.  Follow all instructions published by the automobile and vehicle battery manufacturers, 

especially the procedure of jump-starting of a vehicle. 

3. 

KEEP OUT OF THE REACH OF CHILDREN

4. 

NEVER ALLOW cable clamps (“+” & “-“) to TOUCH each other.    Cable clamps are “live” at all 
times, and will spark once they touch, SecureStart™ will generate heat too.    Always ensure 
clamps are stowed securely in clamp holders when not connected for jump-starting. 

5. 

Check the vehicle cranking system voltage first (12V or 24V) before use.    Turn the selector-
switch on the

 

SecureStart™ to the correct vehicle cranking system voltage.  Turn to the 

wrong voltage will damage the vehicle electrical system. 

6. 

ALWAYS VERIFY vehicle battery positive terminal (RED “+”) before connecting cable clamps 
to battery.    Be aware of connecting sequence. 

7. 

Handle SecureStart™ and vehicle battery with care while jump-starting a vehicle.  Vehicle 
batteries generate hydrogen gas during normal battery operation, such gas may cause 
explosion with a spark.    Care should be taken to ensure sparks are not generated near the 
vehicle battery.   Sparks occur when connecting or disconnecting leads.  Keep sparks and 
flames away from batteries. 

8.  Keep hands and cables clear of fan blades, belts pulleys and other moving parts when 

working near a running engine.    Remove jewelry, watch and loose clothing when near the 
engine compartment.    Take extra care to protect eyes during jump-starting. 

9. 

Do not charge the SecureStart™ in wet or moist locations through the DC charging jack.  
Severe electrical shock may result. 

10.  Do not charge the SecureStart™ in an airtight container, provide adequate ventilation during 

charging. 

11.  Do not attempt to disassemble the SecureStart™.  Do not cut any cables or wires on this 

product.  The 

TMF

®

 power pack contained within your unit is capable of generating very high 

current.    This current may cause severe burns or personal injury. 

12.  Use your SecureStart™ to jump-start vehicles that run with lead-acid battery only. 

13.  Never immerse SecureStart™ into water or seawater. 

14.  Keep SecureStart™ away from sunlight, hot and high humidity environment.    Do not store 

with metal parts such as tools and wires etc. 

15.  SecureStart™ contains non-spill-able sealed lead-acid batteries.  

Under normal and 

appropriate use, the product is safe and there is no exposure to lead.

 

 
16.  Return used SecureStart™ to sales outlet for recycling. 

//

 

LEIM010001, 20090618//

Reviews: