background image

V-5012B INDOOR/OUTDOOR HD 

VIDEO CAMERA

Installation Guide

DESCRIPTION

The V‑5012B is a 2.1 Megapixel 

indoor/outdoor video camera 

that allows users to view live and 

recorded HD video clips in Virtual 

Keypad™.

To activate the camera, you need an 

active Dealer Admin account at  

dealer.securecomwireless.com

.

Compatibility

• 

Any active Virtual Keypad 

account with 

SecureCom 

Cameras & NVRs

 enabled

What is Included?

• 

One V‑5012B Camera with 

Mounting Plate

• 

Mounting Template

• 

Hardware Pack with Security 

Torx L‑key

1

WIRE THE CAMERA

Before connecting the Ethernet cable, install the waterproof 

Ethernet cap if desired. Refer to Figure 2.

Standard Connection

Connect a 12 VDC power supply (not included) to the camera 

power connector. Connect a network cable to the camera Ethernet 

connector. For compatible power supplies, refer to “Accessories”.

PoE Connection

Connect a network cable to the camera Ethernet connector. 

Connect the cable to a PoE switch or injector.

Figure 1: V-5012B Camera

Figure 2: Installing the Waterproof Ethernet Cap

1/4

Turn

Turn

until

tight

Wire

and

crimp,

then

plug in

to camera

Ethernet

connector

Seat

o-Ring

between

cover and

Ethernet

connector,

then slip

cover over

connector

O-Ring

Cover

End Cap

From router/switch

MOUNT THE CAMERA

2

Standard Wall or Ceiling Mount

Refer to Figure 4 when mounting the camera. Use the included 

screws and wall anchors to mount the camera base to a wall or 

ceiling. The mounting surface must be capable of holding five 

times the camera’s weight.

Adjust the Camera

Refer to Figure 5 when adjusting the camera.

1.  Loosen the adjustment screw with the included L‑key.
2.  Adjust the pan, tilt, and camera rotation angle as needed.
3.  To lock the camera in place, tighten the adjustment screw 

with the L‑key.

Reviews: