to send a request (Network Information
Frame) to join the network.
On successful inclusion the LED will flash
2 times.
The total process can take up to 20
seconds; refer to the “Radio” section for
details.
If the LED flashes 4-times this means that
the inclusion process has failed, so try
moving the SES 302/SES 303 to another
position and repeat the Inclusion steps. If
the inclusion process fails again, the device
may be already included in another network.
So first exclude and then include the device.
11
Summary of Contents for SES 302
Page 6: ...a Push spring clips to release b Swing wallplate out and down Wallplate 6...
Page 31: ...NOTES 31...
Page 32: ...32...
Page 33: ...33...
