This guide provides instructions to install,
set up and use Radbot 1.
More information on the product including
How to videos, FAQs and customer support
details, can be found at www.securemeters.com.
Radbot 1 lets you to control the heating of your
rooms by regulating the flow of hot water through
the radiator they are fitted onto. With intelligent
in-built logic, it senses the temperature and
occupancy status in a room and automatically
adjusts the heating to provide you the desired
comfort. This ensures each room is warm when
you are using it and that you are not wasting
energy in heating empty rooms.
Getting started
About Radbot 1
4
Take care when installing and using Radbot 1 as radiators and pipes may be hot if your heating is on.
Radbot 1 is for indoor use only and must be protected from humidity.
Do not attempt to dismantle or modify the device in any way.
The battery cover must only be removed to replace the batteries.
Batteries should be kept away from small children.
We recommend to fix any pre-existing problems with your radiators, valves or pipework prior to installing Radbot 1.
Read these instructions carefully before you begin the installation
Secure meters will not be liable for any damage or loss arising from
incorrect installation or use of the device or components.
Safety instructions
Compatibility
Radbot 1 will not work with
electrical heating systems
or electric radiators.
•
•
•
Combi, system, and heat
only boilers
District heating with
individual radiators
Heat pumps (with flow
temps >45 C)
The device is compatible with most wet central heating systems that use radiators, including:
Dispose of responsibly. Do not throw electrical equipment and batteries into the household waste.
The product is regulated under the Waste Electrical and Electronic Equipment Directive (WEEE)
