Set Up:
The easiest way to set up your SECURAM Touch is to follow the voice guidance.
Press the Function
button to begin:
•
Add User Press 2
- To add the first user
–
Administrator
o
Add User
o
Enter code
–
enter the admin code
–
the default is 123456
o
Verified Successfully
o
Enroll the Administrator first
o
Place first finger
–
place finger on fingerprint reader on the top of the touchpad
o
Place finger
and
Lift finger
as instructed
NOTE: if you do not want to add a fingerprint for a user, press
to skip
o
Fingerprint enrolled successfully
o
Place second finger
–
place a second finger on the fingerprint reader
o
Place finger
and
Lift finger
as instructed
o
Fingerprint enrolled successfully
o
Enter new code
followed by check mark
–
enter a unique code between 4 and 8 digits in
length, followed by
button
NOTE: if you do not want to add a code for this user, press
to skip
o
Repeat new code
–
enter the same code again followed by the
button
o
Operation successful
IMPORTANT: this new code is the Administrator code. It replaces the default Administrator
code 123456.
o
To add other users, follow the same process as above.
o
You can categorize users as either owners (by selecting 1) or visitors (by selecting 0)
▪
Visitor access can be disabled at any time by toggling the visitor access button
above the thumbturn.
Masking Codes: Valid codes can be 4-8 digits in length. We have added the ability to mask your
code by adding extra digits to your valid code. Masking can be used in case someone is watching
as you enter your code and you don’t want them to know your code. To mask your code, enter
a
maximum of 9 digits where your code is entered as consecutive digits. For example,
o
Valid code is 9876
o
To mask your code, you could enter 78
9876
824 (9 digits)
o
Likewise, you could enter 1
9876
88 plus the
button (less than 9 digits)
o
The lock will open
•
Delete User press 3
