Radio Key
®
RKDT-SA-M/SA-S Operating Guide
Secura Key
17
Set the Operating Mode:
The Radio Key
®
RKDT-SA-M/SA-S may be put into any of four
operational modes. The Modes are as follows;
“1” - Active (Normal) -- LED is Off
“2” - Inactive (Locked) -- LED blinks Red
“3” - Door Unlocked -- LED blinks Green
“4” - Toggle Mode – LED is Off
In mode 1, a valid card or tag or closure of the remote open
input will activate the relay for the time the latch timer is set.
Mode 2 deactivates the unit. No card or tag can activate the
relay, but the remote open input will activate the relay.
In mode 3, the door is kept unlocked (the relay is kept latched).
In mode 4, when a valid card or tag is presented or the
remote open input is activated, the relay changes its state
from deactivated to activated or from activated to deactivated.
The relay will stay in this state until another valid card or tag is
presented or the remote input is activated and so forth.
To set the Operating Mode, put the unit into the Program mode,
(See Page 9). Press MODE, then press either “1” , “2”, “3”, or “4”.
Press ENTER. The Access Control Unit will exit Programming
