16
HAVE QUESTIONS? GETSECURA.COM
Schedules allow you to program the times you want your system to arm
or disarm each day of the week or schedule when you want your Z-wave
devices to turn on and off.
ADDING A PERMANENT SCHEDULE
Permanent schedules are used for automatic arming and disarming
and always occur at the same time until you change or delete them.
1. Access the user menu and press
CMD
until
SCHEDULES?
displays. Press any select area.
2. SUN MON TUE WED
displays. Press
CMD
to display
THU
FRI SAT
. Select a day of the week you would like to create a
schedule for.
3. OPENING TIME?
displays. Press
CMD
and enter the time
you want the system disarmed. Use a 12 hour clock only (12:00
to 11:59) and select
AM
or
PM
.
4. CLOSING TIME?
then displays. Press
CMD
and enter the
time you want the system to arm.
EXTENDING A SCHEDULE
Allows you to extend today’s programmed closing time schedule.
1. Access the user menu and press the
CMD
key until
SCHEDULES?
displays. Press any select key or area.
2. The keypad displays
PRM EXT OUT FAV.
Select
EXT
.
3. The keypad displays
– : AM PM
. Enter in the new time for the
closing schedule to expire.
WORKING WITH SCHEDULES
