(New Password - 54321)
(Re-type New Password - 54321)
(ENTER)
(THRU)
(THRU)
Radio Key
®
RK-65K Operating Guide
Secura Key
9
+ 5 + 4 + 3 + 2 + 1 +
+ 5 + 4 + 3 + 2 + 1 +
Lost or forgotten Password (RK65K/RK100M)
If the password is lost or forgotten, it can be restored to the
factory default (12345). Remove the Radio Key
®
RK-65K
unit from the wall and disconnect power. With the Data 1 line
(white wire) temporarily connected to the Remote open line
(brown wire), restore power. The factory default (12345) is
now in effect. The LED will fl ash alternately Red and Green.
While this is occurring, set the Facility Code or Codes in the
reader (see below). Remove power and reconnect the unit for
operation, restore power and remount the unit. This procedure
will NOT delete any transponders from reader’s memory.
Setting Facility Code(s) (RK65K)
Before any cards are added to the RK-65K you must set the
Facility Code or Codes. When a new reader is fi rst powered
up the LED should be fl ashing alternately Red and Green. This
indicates that the unit is in the “Learn Facility Code” mode.