_ 4
●
Products Specifications
Model
Authentication Method
PIN-code
(up to 10)
Card key
(up to 30)
Fingerprint
(up to 100)
Emergency
Key
(2ea)
Remote controller
(Optional Features)
S200
up to 5
S201
S220
Description
Specification
Door Thickness
40~50mm
Rated Voltage
DC6V (LR6 1.5V AA Alkaline battery only)
Operating Temperature
-20℃~ 50℃
Temperature Sensor Operating Range
60℃ (±5℃)
Material
Al, Zn, ABS
ㆍ If the door thickness is out of the standard specification, please be advised from an expert
for installation. The screws may differ according to the door thickness.
●
Products Components
ㆍOuter body, Inner Body
ㆍStrike, Spacer
ㆍAA batteries 4ea
ㆍScrews
ㆍUser Manual
ㆍInstallation Instruction / Installation Template
ㆍRemote Controller (Optional)
1.
2.
3.
4.
Registration of New Authentication Measures
While registering authentication measures such as PIN-codes, Card keys, Fingerprints
and remote controllers, the door has to be open. Before closing the door, test first if the
Dead bolt is operating properly by using
[OPEN/CLOSE]
button.
Registered authentication measures cannot be individually deleted.
When registering
new authentication measures, all previously registered authentication measures will be
automatically deleted. (PIN-code, Card key, Remote Controller)
If there were no inputs for
7 seconds
after pressing the button, the touch plate will
be off and the registration process will be cancelled.
The default PIN-code is
“1234”
to be operated during its initial setup.
※ Remote Controller is optional.
Products Specifications/Components
