9. Alarm Setting
9.1 Motion detection
By analyzing the video image, when the system detects that a mobile signal that
reaches the preset sensitivity occurs, the motion detection alarm is activated, and the
linkage function is activated.
The motion detection function of the network channel and the full network channel
mode of the full analog channel and the mixed channel mode is different: the network
channel motion detection alarm not only needs to enable the motion detection function on
the local end, but also the corresponding front-end network camera will also move. The
detection function is enabled, otherwise the motion detection alarm function cannot be
implemented, and the analog channel only needs to enable the motion detection on the
local end.
FAQ: Motion detection does not work
1. Check whether the firmware of the video recorder and camera are updated to
the version after 2015. Some old versions do not support the linkage setting of the
IPC area.
2. At present,
motion detection only supports the setting of devices
connected by private protocol, check whether the camera is made by Seculink.
“Channel”Click the drop-down menu to select the channel number to set the motion
