Secufirst CAM214W, Manual

Page: 29 / 73

Notification Setting
29
If the camera see motion, it will start to record and send a push message to your mobile
phone(S) or tablet(s).
This function only applies to motion detection. It doesn’t have effect on the calling page
when a visitor will press the Wi-Fi door phone. Turn the switch to your preferred setting.
ON = When the camera see movement, it will start to
record and send a push message.
OFF = When the camera see movement, it will start to
record and will NOT send a push message.
TIP, A camera cannot be compared with an alarm system. Because it is outdoor, 99,9%
of all movement recordings are correct. The mail man, children’s, cars etc. are all correct
movements, but no need to be alarmed. Our advice is to turn off the Notify settings and
only look back recordings when something has happened.
Important: When the Notify setting is setup to OFF , that means ALL the phone or tablet
that has setup with the Wi-Fi Doorbell will “ NOT ” receive any notification. If you only
want to turn off notification temporary on specific device, please follow instruction on
following pages.