-- page 3 --
C) CHANGING THE NUMERICAL CODE
TEST – TO BE PERFORMED WITHOUT FAIL!!
For safety reasons, only reprogram the lock with the safe door open and blocked in the
open position. Only after you are absolutely certain that the lock has been reprogrammed
successfully and that the lock can be electrically cleared and mechanically unblocked
using the new settings, should the door be closed.
Enter the setting mode to change one of the codes
ONLY CHANGE THE LOCK SETTINGS WITH THE SAFE DOOR OPEN AND BLOCKED. DO NOT MAKE UP
NUMBER CODE OF PERSONAL DATES (i.e. no wedding anniversaries, birthdays etc.)
1. Press
On/Enter
key. When the lock is ready for operation, the welcoming phrase on the display is followed after two
seconds by a message prompting the operator to enter a valid code. The black rectangular cursor sits blinking at the
first digit of the code entry field and the capital letter “
M”
appears above the
Function
key.
2. By pressing the
Function
key, the menus of the setting mode appear. In this mode, the symbols above keys
“1”
and
“2”
serve as operating symbols to navigate through the menu (up or down). The first menu to appear is
Code change.
Use keys
“1”
and
“2”
to activate the other options on the menu.
Changing the administrator code (factory setting 1 2 3 4 5 6 7)
1. As soon as you enter the setting mode, the cursor will automatically go to
Code change
. To select, press the
On/Enter
key.
2. Next, the administrator and the various users are depicted on the display with the administrator in first place. To select
the administrator, press
On/Enter
.
3. The lock now prompts the operator to enter the old code existing thus far. Key-in the old code (when taking the lock
into operation the first time, enter the factory setting 1 2 3 4 5 6 7) and confirm with the
On/Enter
key
.
4. Next, the lock prompts the operator to enter the new code. Key-in the new code and confirm by pressing
On/ Enter
.
As a safety feature, the lock prompts the operator to enter the new code a second time. Confirm once more by pressing
the
On/Enter
key.
5. The lock confirms the successful change of the administrator code by means of the message
Code change
completed!
; if the operation was not successful, the message will read
Wrong code!
. You can leave the active menu
field in the setting mode by pressing the
Function
key whenever you see the symbol
“<“
above the key. After leaving
the setting mode, the lock is again ready for clearing. The operator is prompted to enter a valid secret code.
Changing an existing user code
1. As soon as you enter the setting mode, the cursor will automatically go to
Code change
. To select, press the
On/Enter
key.
2. Next, the administrator and the various users are depicted on the display with the administrator in first place. In the
setting mode, the symbols above keys
“1”
and
“2”
serve as operating symbols to navigate through the menue (up
or down). Using keys
“1”
und
“2”,
go to the user whose code is to be changed. Select the desired user by pessing
On/Enter
.
3. The lock now prompts the operator to key-in the user’s old code. Enter old code and confirm by pressing
On/Enter
.
4. Next, the lock prompts the operator to key-in the user’s new code. Enter new code and confirm by pressing
On/ Enter
.
As a safety measure, the lock prompts the operator to enter the new code a second time. Enter code and confirm once
more by pressing the
On/Enter
key.
5. The lock confirms the successful change of the user code by means of the message
Code change completed!
; if the
operation was not successful, the message will read
Wrong code!
. You can leave the active menue field in the setting
mode by pressing the
Function
key whenever you see the symbol
“<“
above the key. After leaving the setting mode,
the lock is again ready for clearing. The operator is prompted to enter a valid secret code.
SELO-B-Standard-Betriebsanleitung-englisch.p65
