Security & Electronic Technologies
Seite
8
Your Tank Data´s Display
Press
Mode
once the last current measurement is displayed.
Error Measurement
Error GSM Mode
Display
Operating mode, description.
Standard
Tank content in percent
Tank content in Litres.
Proceed with Mode
Tank content in percent
Up to 99.999 Litres
Proceed with Mode
Tank content in percent
Proceed with Mode
Ullage
How many litres can be filled for full tank
Proceed with Mode
Measured depth
Distance from Sensor to surface in cm
Proceed with Mode
Average daily consumption
litres per day (last 10 days)
Proceed with Mode
Number of remaining days
Based on average consumption
Available after 10 days , before the error symbol E appears
Proceed with Mode
Temperature in °C
Temperature inside LC200 device
Proceed with Mode
Full : distance sensor to sureface below 20 cm
Error code figures from 0 to 3
0
– no error
2
– no correct measurement check LC 200
position.
90° to surface is a must.
3
–measurement result not logical – check
settings. Measured depth is higher than setup
value
instead of the default display
appears E error has occurred -
The number on right side
describes the type of error.
0 = OK
1 =
no answer from the GSM Module
2 =
no registration into the network possible
3 =
not possible to send the SMS to 1.
r
eceiver
4 =
not possible to send the SMS to 2.
r
eceiver
7 =
SMS was not sent to both recipient
8 =
the GSM-module can't receive data from the
processor
9 = the LC lost the network registration during sending
the SMS