SECTOR ALARM – DOMONIAL USER INSTRUCTIONS 4
How to use the alarm system
The alarm system is easy and convenient to operate using the
keypad, remote control or keytag.
Activating using the keypad
Full Arm mode (activates the entire alarm system)
Close all of the exterior doors and windows before activating the system.
Press the button
Activating Full Arm mode
.
The signal light 1 will light up and flash to confirm the command before switching off
again.
A warning alert will sound for a moment as you leave. In the case of a system error,
a warning tone will be emitted. You should rectify the system error and then try to
activate the system again.
Part Arm mode (activates part of the alarm system*)
Close all of the exterior doors and windows before activating the system.
Press the button
Activating Part Arm
mode
.
The signal light 1 flash until the alarm is activated.
No warning alert will sound as you leave (If set to Part Arm silent). In the case of a
system error, a warning tone will be emitted. You should rectify the system error and
then try to activate the system again
*
Part Arm mode
is programmed according to your needs. The Sector Alarm Security Advisor will
program the alarm according to your preferences.
8
HOW TO USE THE ALARM SYSTEM
