Signal lights on the keypad
There are three signal lights on the front of the keypad. These
indicate the current status of the alarm system.
Signal light 1 – alarm triggered
On
: The alarm system has been triggered or one of the detectors is unable to be
activated. This could be because a door or window protected with a magnetic sensor
is open.
Flashing
: There is an alarm in the alarm system’s memory which needs to be reset.
Off
: The alarm system is ready to be activated.
Signal light 2 – system error
On
: An error has occurred in the alarm system. This could be due to a problem with the
battery, power supply or because of a problem with sensor monitoring, an error with the
GSM/GPRSor interferences. Contact customer service for assistance.
Flashing
: There is an error in the alarm system’s memory which needs to be reset.
Off
: The system is free of errors.
Signal light 3 – tamper alarm
On
: A tamper alarm has been triggered in the system. This could be due to failure or
sabotage.
Contact customer service for assistance.
Flashing
: There is a tamper alarm in the alarm system’s memory which needs to be
reset.
Off
: The system is free of tamper alarms.
Resetting
You can reset the alarm system by entering your personal code or using your
keytag. If there are various alarms triggered in the system memory, you will need to
repeat the rearming process until LED lights 1, 2 and 3 are all switched off.
HOW TO USE THE KEYPAD
7
