GSV4M
–
GSM / GPRS communicator is designed to be used with other manufacturers' intruder alarm systems. The communicator expands
the functionality of other manufacturers’ intruder alarm systems by giving the options to report to the receiver of central monitoring station via
GPRS, to send a notification via SMS or phone call.
(for example, to trigger a key-switch zone and arm / disarm the system).
It is possible to connect GSV4M to control the panel in few different ways:
Connection to the PSTN dialer of control panel. By simulating an analog telephone line GSV4M enables the control panel with PSTN dialer to
report to CMS or the user. Compatible with control panels that communicate using the Contact ID format.
Connection to the control panel keybus. GSV4M analyses the control panel keybus, and when it is necessary, sends a report to CMS or
notification to the user.
Connection to control panel PGM outputs. In case of alarm, the control panel output triggers GSV4M input. The communicator acts as
programmed and sends the report to CMS or notification to the user.
The communicator has two open collector outputs capable of a maximum of 50mA. User can
trigger the outputs to turn on an LED or activate an input on the host panel
GSV4M communicator
Connection to PSTN dialer of control panel. The communicator is powered from independent power supply
GSV4M
S1
12V battery
7Ah/20HR
Live
wire
L
Neutral
wire
N
Protective
Earth wire
PE
Main Protective
Earthing terminal
AC power transformer:
Primary winding: 230V
AC
50Hz
Secondary winding: 20V
AC
50Hz
~
~
Power supply
distribution board
Enabled
Contact ID
12345
Disabled
Disabled
Control panel PSTN dialer
programming
Reporting:
Format:
Phone number for dialling:
Phone line monitoring:
Dial tone search:
Control panel
G
rounding
place
G
rounding
place
Protective
Earth wire
PE
Main Protective
Earthing terminal
GSM/GPRS communicator GSV4M is powered from an independent power supply. The independent power supply that contains a fuse block, power
transformer and 12V 7Ah battery together with the communicator have to be placed in a grounded metal housing.
Connection to PSTN dialer of control panel. The communicator is powered from control panel power supply
2
GSV4
M
Universal GSM / GPRS communicator
Wiring manual
+
1
2
V
R
IN
G
C
O
M
IN
1
IN
3
IN
4
IN
5
IN
6
2
0
V
A
C
P
G
M
1
P
G
M
2
T
IP
IN
2
Fuse
250mA
R
-1
T
-1
R
IN
G
T
IP
+
1
2
V
C
O
M
TIP RING T-1 R-1
COM
+12V
TIP
RING
Mounting communicator in cabinet
Communicator has to be fastened in cabinet by
using plastic studs. Communicator mounting holes
should correspond to cabinet's rear wall holes. Do
not forget to fix the plastic studs in the rear holes
before fastening the cabinet on a wall.
Plastic stud
Cabinet
GSV4M
GSV4M
S1
Control panel
+
1
2
V
R
IN
G
C
O
M
IN
1
IN
3
IN
4
IN
5
IN
6
2
0
V
A
C
P
G
M
1
P
G
M
2
T
IP
IN
2
R
-1
T
-1
R
IN
G
T
IP
+
1
2
V
C
O
M
TIP RING T-1 R-1
COM +12V
Enabled
Contact ID
12345
Disabled
Disabled
Control panel PSTN dialer
programming
Reporting:
Format:
Phone number for dialling:
Phone line monitoring:
Dial tone search:
