X86
UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
41
4.3
Advanced menu
4.3.1
Boot configuration submenu
4.3.2
Security configuration (TXE) submenu
Menu Item
Options
Description
Boot Configuration
See submenu
Configures settings for Boot Phase
Security configuration
See submenu
Trusted Execution Environment Security Configurations
Video Configuration
See submenu
Configures the options for video section
Chipset Configuration
See submenu
Configure Chipset
’
s parameters
ACPI Table / Features Control
See submenu
Configures the parameters for ACPI management
SATA Configuration
See submenu
Select the SATA controller and hard disk drive type installed in the system
Console Redirection
See submenu
Configures the parameters for Console redirection
POST Hot Key
See submenu
Configure POST Hot Keys
Other Configuration
See submenu
Other parameters settings
Menu Item
Options
Description
OS Selection
Windows / Android
Configures the BIOS in order to support properly Windows or Android OS.
Numlock
On / Off
Allows to choose whether NumLock Key at system boot must be turned On or Off
Menu Item
Options
Description
TXE HMRFP0
Disabled / Enabled
Enable this option to remove temporarily the flash protection, in order to program the Intel
®
TXE region
TXE Firmware update
Disabled / Enabled
Enable this option to require a re-flashing of TXE Firmware Image
TXE EOP Message
Disabled / Enabled
Send EOP (End of POST) Message before entering OS
TXE Unconfiguration Perform
Yes / No
Only selectable on CPUs with the TXE feature.
Allows to revert TXE settings to the factory defaults
Measured boot
Disabled / Enabled
Enable or disable the measured boot, which provide to antimalware software a trusted log of all boot
components that started before the antimalware software itself.
