X86
UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
21
3.1
Introduction
On UDOO x86 board, there are several connectors located on the upper plane. Standard connectors are placed on the same side of PCB, so that it is possible to
place them on a panel of an eventual enclosure.
TOP SIDE
BOTTOM SIDE
Please be aware that, depending on the configuration purchased, the appearance of the board could be slightly different from the following pictures.
Buttons/LED
header
Arduino interface
+ expansion
connector #3
DC Power jack
Arduino interface
+ expansion
connector #4
Arduino interface
+ expansion
connector #2
CIR Receiver
USB 3.0 Port #2
connector
Gigabit Ethernet
RJ-45 connector
HDMI connector
+
connector #1
+
connector #2
Embedded
controller JTAG
(reserved)
UDOO bricks
connector
USB 3.0 Ports #0
#1 connectors
Mic + Headphone
TRRS socket
Speaker headers
JTAG connector
Arduino interface
+ expansion
connector #1
FAN connector
SPI Header
µ
SD Card Slot
Cabled RTC
battery connector
SATA Connector
SATA power
connector
M.2 WWAN/SSD
Slot (Socket 2
Key B)
M.2 Connectivity
Slot (Socket 1 key
E)
