Q7-C26
Q7-C26 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 Author: A.R - Reviewed by S.R. - Copyright © 2020 SECO S.p.A
15
2.3
Electrical Specifications
According to Qseven
®
specifications, Q7-C26 board needs to be supplied only with an ex5V
DC
power supply.
5 Volts standby voltage needs to be supplied for working in ATX mode.
For Real Time Clock working and CMOS memory data retention, it is also needed a backup battery voltage. All these voltages are supplied directly through card
edge fingers (see connector
’
s pinout).
All remaining voltages needed for board
’
s working are generated internally from +5V_RUN power rail.
2.3.1
Power Consumption
Q7-C26 module, like all Qseven modules, needs a carrier board for its normal working. All connections with the external world come through this carrier board, which
provide also the required voltage to the board, deriving it from its power supply source.
Anyway, it has been possible to measure power consumption directly on VCC power rail (5V
DC
)that supplies the board.
The power consumption has been measured in a Q7-C26 module with the following configuration on the commercial version:
-
CPU iMX8 QuadMax 1.6GHz
-
RAM LPDDR4 4GB, eMMC 8 GB
-
LVDS + HDMI/DP video outputs
Status
Average value
Peak Value
Idle at U-Boot
3.28W, 0.66A
3.33W, 0.67A
Boot to OS
4.64W, 0.93A
8.69W, 1.74A
Idle
4.75W, 0.95A
5.23W, 1.05A
Video 1080p 60fps
6.85W, 1.37A
8.65W, 1.73A
Playing internal demo tutorial
5.95W, 1.19A
8.65W, 1.73A
Internal Stress Test tool
13.8W, 2.76A
14.2W, 2.84A
