CQ7-A42
CQ7-A42 - Rev. First Edition: 1.0 - Last Edition: 1.3 - Author: S.B. - Reviewed by G.G. Copyright © 2015 SECO S.r.l.
14
2.2
Technical Specifications
Supported Modules
Qseven
®
Rel. 2.0 compliant modules
Mass Storage interfaces
1 x S-ATA connector with HDD Power connector
1 x mSATA Slot
microSD Slot on combo m SIM connector
Video Interfaces
LVDS Dual Channel 24-bit + backlight connectors or 2 x eDP connectors
Multimode Display Port or HDMI Connector
Audio
Audio interface on internal pin header
USB
1 x USB3.0 Host port on type-A socket
2 x USB2.0 Host ports on double Type-A sockets
2 x USB2.0 Host ports on internal pin header
1 x USB 2.0 OTG port on micro-AB socket (USB port shared with miniPCI-e slot)
PCI Express
miniPCI-e slot Full/Half Size, combined with SIM card slot
Networking
Up to 2 x Gigabit Ethernet connectors
Serial Ports
4-wires RS-232/RS-422/RS-485 configurable serial port on DB9 male connector
2 x RS-232 Full-modem serial ports on internal header (need LPC interface from
Qseven
®
module)
CAN interface on PCB terminal block
Other Interfaces
SPI internal pin header
LPC Bus internal pin header
SM Bus / I2C GPIO expander, makes available 16 x GPIOs on internal pin header
Front Panel Header
1 x 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch
Dog, Thermal Management)
+12V Tachometric FAN connector
Optional Debug USB port on miniB socket
Optional MFG connector for JTAG programming of Qseven
®
module
Power supply voltage: +12V
DC
Mini-fit Standard ATX power connector
Coin cell battery Holder for CMOS and RTC
Operating temperature: -40°C ÷ +85°C (industrial temperature range)
Dimensions: 146 x 102 mm (5.75
”
x 4.02
”
)
* Temperature ranges indicated mean that all components available onboard
are certified for working with a Tcase included in these temperature ranges.
This means that it is customer
’
s responsibility to ensure that all components
’
Tcases remain in the range above indicated. Please also check paragraph
4.1.