ENFORCER Push-to-Exit Bar
4
SECO-LARM U.S.A., Inc.
Sample Installation:
Locking the Bar Closed:
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Phone: (949) 261-2999 | (800) 662-0800 Email: [email protected]
PITGW1
MI_SD-961A-36_190627.docx
NOTICE:
The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM
reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks
are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2019 SECO-LARM U.S.A., Inc. All
rights reserved.
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for one (1) year from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or
replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if
damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration,
improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment
is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of
SECO-LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM’s
option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property
damage of any kind to the purchaser or anyone else.
IMPORTANT:
It is the responsibility of the installer and/or end-user customer to ensure the SD-961A-36 meets all local
regulations regarding the use of push bars for access security, including: Suitability for doors accessed by disabled persons
and suitability for fire doors (the push bar is not fire-rated).
WARNING:
The push bar is not weatherproof. Do not mount on exterior surfaces or where exposed to rain.
IMPORTANT:
The height at which the push bar is mounted may be subject to local regulations.
Included with the push bar is a miniature key with a square hole. To lock the push bar closed (to
allow two-way, uncontrolled access to the protected area), remove the squarehead bolt’s round
cover, push the bar in all the way, and turn the square-head bolt with the key. To release the bar,
turn the square-head bolt again.
Connect to unlock an electromagnetic lock
Power
Supply
Switch 1
Switch 2
N.C.
COM
N.O.
N.C.
COM
N.O.
Electromagnetic Lock (Fail-safe)
E-941SA-1200
