52 •
seca mVSA 535
/
seca mBCA 525
1
7-
10
-0
5-
35
3-
00
2g
_1
0-
20
20
B
NOTE
Get the patient to sit quietly for 5 minutes before recording measured
values. The patient should remain relaxed and not talk during the
measurement.
You have the following options for continuing:
► ➔
► ➔
Starting a multiple measurement
NOTICE!
Faulty operation, missing measuring results
Results from multiple measurements cannot be transmitted to EMR
systems or the
seca analytics 115
PC software.
►
Switch to Single measurement, if necessary, if you want to transmit
blood pressure values to an EMR system or the
seca analytics 115
PC software
.
NOTE
Your administrator will specify whether Single measurement or Multi
-
ple measurement is available when the device starts up. You can
modify this and other presets for the current measurement procedure:
. After this, the settings specified by the adminis
-
trator will be active again.
Starting a single measurement
►
Press the
button on the monitor.
Blood pressure measurement starts:
Current cuff pressure is displayed.
The symbols for measurement procedure and measuring mode flash (in
this case: Single measurement, inflation).
Measurement stops automatically as soon as valid blood pressure values
are detected.
The values for systolic/diastolic blood pressure
SYS/DIA
and mean
arterial pressure
MAP
are displayed.
You have the following options for continuing:
►
►
Measure bioimpedance
►
Stop the measurement procedure
NOTE
• Using the Start button, you can cancel and restart blood pressure
measurement at any time.
