Seben JH-1702, Specification

Page: 10 / 25

10 EN
5 Put the pre-f ilter back into the
appliance.
Note
• M ake sure that the side with the
two clips is pointing towards
you, and that all hooks of the
pre-f ilter are properly attached
to the purif ier.
6
To reattach the side panel,
mount the panel onto the
bottom of the appliance f irst
(1). Then, gently push the
panel against the body of the
appliance (2).
7
Repeat the above steps and
assemble the air purif ication
f ilter for the other side of the
appliance.
4 Using the
applianc
Understand the air
quality light
Color of the air
quality light Air quality
level
Blue Good
Fair
Unhealthy
Red Very
unhealthy
The air quality light automatically
goes on when the appliance is
switched on, and lights up all colors
in sequence.
In a short time the air quality
sensors select the color that
corresponds to the ambient air
quality.
Switch on
1 Put the plug of the appliance
into the wall socket.
The appliance beeps.
All lights go on once and
then go out again.
1
Front 前
2
1
Light yellow
Orange
1
2