Put the pre-f ilter back into the
appliance.
Note
• M
ake sure that the side with the
two clips is pointing towards
you, and that all hooks of the
pre-f ilter are properly attached
mount the panel onto the
bottom of the appliance f irst
(1). Then, gently push the
panel against the body of the
appliance (2).
7
Repeat the above steps and
assemble the air purif ication
f ilter for the other side of the
appliance.
4 Using the
quality light
Color of the air
quality light
Air quality
level
Sky b
lue
Good
Fair
Unhealthy
Red
Very
unhealthy
The air quality light automatically
goes on when the appliance is
switched on, and lights up all colors
in sequence.
In a short time the air quality
sensors select the color that
corresponds to the ambient air
quality.
Switch on
1 Put the plug of the appliance
into the wall socket.
The appliance beeps.
All lights go on once and
then go out again.
Ocean blue
Purple red
2 Press the power On/Off
to switch on the appliance.
T
h
e
appliance
operates
under
(AUTO)
mode
by
default
.
After measuring the air
quality for a short time,
the air quality sensor
automatically selects the
color of the air quality light.
The runn
ing
strips "
"
displays on the screen when
the appliance is measuring
the PM2.5 level. After a short
time the actual PM2.5 level
w
il
l dis
p
lay on the screen.
3 Press the power On/Off button
again to switch off the
appliance.
Press both fasteners on left
and right side of the top
cover then lift the top cover
to open it.
Take out the two carbon
filters, remove their
packaging materials and
then put them back into
the appliance.
Carefully close the
top cover.
