9
step 3
Drill in the rudder, 20mm from the bottom, the location for the tail wheel using a 2mm drill bit.
Than locate the items included in the hardware pack, and assemble them as per picture.
step 4
With the hobby knife cut a groove of 20mm length into the rudder. Carefully put some drops of
medium CA into the 2 mm hole and right after put in his rudder location the tail wheel.
Than carefully locate the rudder and glue the hinges with some drops of thin CA.
step 5
Using the hardware included and Phillips screwdriver, install the tail wheel, as per picture.
