For the ELEVATOR
we recommend the following throws:
High rate:
50° up & down
Normal flight & pattern:
D/R: 30%
Expo: 40%
3D aerobatics:
D/R: 100%
Expo: 80%
For the RUDDER
we recommend the following throws:
High rate:
45° left & right
Normal flight & pattern:
D/R: 60%
Expo: 25%
3D aerobatics:
D/R: 100%
Expo: 40%
Note: the Expo is (+) for JR systems, and (–) for Futaba systems.
Mixing
We recommend the following mix (if you have a programmable computer radio):
Rudder →Elevator UP
full rudder to the right, the elevator have to go up (positive) approx. 16%
full rudder to the left, the elevator have to go up (positive) approx. 16%
Rudder →Ailerons
full rudder to the right, the ailerons have to go LEFT approx. 6%
full rudder to the left, the ailerons have to go RIGHT approx. 6%
Recommended Center of Gravity
The recommended CG is
110mm
behind the leading edge of wing.
Pre-flight
Never attempt to make full throttle dives!
This model have to be flown like a full-
scale airplane. If the airframe goes too fast, such as in a high throttle dive, it may fail.
Throttle management is absolutely necessary.
