7. Adding a Logo to the Label
Note
The Tester Logo Transfer program cannot be used to design a logo
but is only used to transfer a suitable logo into the tester.
The logo must be monochrome, and no more than 320 pixels wide by
240 pixels high. The program will check that the logo meets this
criteria before transfer to the tester. If the logo validation fails a
warning message is displayed and the logo cannot be transferred.
To select a logo from the
Test ‘N’ Tag Logo
drop down select
User
defined
. Select a bit map file of the logo with the aid of the
Browse...
Button if necessary. Optionally set a Label Title as defined above.
Transfer
To send the Logo and/or Label Title to the tester ensure the correct
Com Port
is set then press the
Transfer…
button. Put the tester into
REMOTE MODE (see tester Instruction Manual) then select OK. The
18
Summary of Contents for Test 'n' Tag
Page 24: ...8 Parts List 22...
