5. Printing Labels
Select Exit at the Toolbar to close the program.
Note
Should the update fail part way through for whatever reason, perhaps
the cable is accidentally disconnected then it is not necessary to re-
establish communication. By selecting the button
Send Another
Software Update File
the file can be re-selected and sent again.
To complete the update process on the tester power off the tester
then power back on after about 5 seconds checking that the new
software version number is displayed i.e. SNEU.27a.
It is necessary to restore FACTORY SETTING, CLEAR RESULTS
MEMORY and CLEAR UPLOAD MEMORY on the tester to enable
the new software to function correctly (see the tester Instruction
Manual).
5. Printing Labels
Note
This section should be read with reference to the tester’s Instruction
Manual
8
Summary of Contents for Test 'n' Tag
Page 24: ...8 Parts List 22...
