The SecureView
®
indoor video security camera can also be
placed in pole lamps, standard porcelain lamp sockets, ceiling fan
lamp sockets, and so forth.
Use of SecureView
®
in table lamps or floor lamps, where the bulb
points upward, will produce unsatisfactory results and is not
recommended.
Installing the SecureView
®
Decoder
The SecureView
®
Decoder looks like a plug-in transformer, such
as those commonly used to power small appliances. However, it
is actually a sensitive IRFS™ receiver, which allows you to view
SecureView video on any standard television or video recorder.
1.
Locate the RCA "video out" jack on the
bottom of the decoder.
2.
Connect a standard video cable to the
decoder.
3.
Connect the other end of the video cable to
the video Line Input jack of your TV or video
recorder.
4.
Plug the decoder into a wall outlet.
5. Turn on the TV and select the Line Input
("Line" "Aux" or "A/V") on your TV or
recorder and view the picture from the
SecureView Camera. (See the Instructions
provided with your TV set.)
IN OUT
VIDEO
❷
❸
❹