IMPORTANT SAFETY INFORMATION
This is an electrical device. Use common sense and follow proper
safety procedures when installing or removing this product.
◆
Do not work alone under hazardous conditions.
◆
High short circuit current through conductive materials could cause severe burns.
◆
A licensed electrician is required to install permanently wired equipment.
◆
Check that all power cord(s), plug(s), and sockets are in good condition.
◆
To reduce the risk of electric shock when grounding cannot be verified, disconnect
the equipment from the AC power source before installing or connecting to other
equipment. Reconnect the AC power only after all connections are made.
◆
Do not handle any metallic tools or connectors before power has been removed.
◆
Use one hand, whenever possible, to connect or disconnect cables or power, in
order to avoid a possible shock from touching two surfaces with different electrical
grounds.
◆
All sockets and receptacles should be properly grounded and connected to
appropriate branch circuit or mains protection (fuse or circuit breaker).
Connection to any other type of receptacle or socket may result in a shock
hazard.
◆
Do not attempt to open, disassemble, or repair the equipment. Contact the
manufacturer for service or repair information.
◆
Do not use the product submerged in water, or below grade outdoors. Avoid
handling any electrical device in wet environments.
Video Security Camera and Decoder
Installation and Operating Instructions
IMPORTANT
Please read these instructions
carefully before using the product.
!