14
15
EN
SVB Spezialversand für Yacht- & Bootszubehör 2016
SVB Spezialversand für Yacht- & Bootszubehör 2016
4. Repairs
Small tears, cuts and holes:
• In order to seal a small leak or hole of 1mm to 12 mm in size, cover it with a
round patch with a minimum diameter of 75 mm.
• The patch and the surface of the boat must be dry and free of any dust and
grease.
• Apply 3 fine, uniform layers of adhesive on to the surfaces of the dinghy and
the patch, at an interval of every 5 minutes. After the third layer has been
applied, wait 10 to 15 minutes before applying the patch. Press it firmly into
place.
• Wait at least 24 hours until you inflate the boat again. For major defects,
damaged seams, damage to the chamber walls or to the transom or trimmings:
Contact SVB’s customer service department for inquiries concerning all major
repairs.
SVB- Customer Service:
SVB Yacht- und Boat Accessories GmbH
Gelsenkirchener Str. 25-27
28199 Bremen
[email protected] / [email protected] / [email protected] / [email protected]
www.svb.de / www.svb-marine.fr / www.svb-marine.it / www.svb24.com
4. Technische Daten
Type
Type
Length
Max. engine power
Max. engine
weight
Max. engine
weight
Max. load
Width
Weight
Hose Ø
air chambers
