Seat Toledo 2019, Owner'S Manual, Page: 232 / 300

Driving
moved from the R position, and the optical in-
formation provided by the Parking Aid system
will be displayed.
Also in combination with the system, the rear
assist image can also be concealed:
●
By pressing one of the Infotainment system
buttons on the display.
●
OR: By pressing the miniature vehicle that
appears on the left of the screen (which
switches to the full-screen mode of the Park-
ing System Plus's optical system).
If you wish to display the rear assist image
again:
●
Disengage reverse, or change the selector
lever's position, engage reverse again or
move the selector lever to position
R .
●
OR: Press the
RVC
function button 1)
Meaning of the orientation lines
›››
Fig. 231
Side lines: extension of the vehicle (the
approximate width of the vehicle plus the
rear view mirrors) on the road surface.
1
End of the side lines: the area marked in
green ends approximately 2 m behind the
vehicle on the road surface.
Mid line: indicates a distance of approxi-
mately 1 m behind the vehicle on the road
surface.
Horizontal red line: indicates a safe dis-
tance of approximately 40 cm at the rear
of the vehicle on the road surface.
Parking manoeuvre
●
Place the vehicle in front of the parking
space and engage reverse gear (manual
gearbox) or move the selector to the
R posi-
tion (automatic gearbox).
●
Reverse slowly, and turn the steering wheel
so that the side orientation lines lead towards
the parking space.
●
Guide the vehicle into the parking space so
that the side orientation lines run parallel to it.
2
3
4
Fatigue detection (break
recommendation)*
Introduction
The Fatigue detection informs the driver when
their driving behaviour shows signs of fatigue.
WARNING
Do not let the comfort afforded by the Fati-
gue detection system tempt you into taking
any risks when driving. Take regular breaks,
sufficient in length when making long jour-
neys.
●
The driver always assumes the responsi-
bility of driving to their full capacity.
●
Never drive if you are tired.
● The system does not detect the tiredness
of the driver in all circumstances. Consult
the information in the section
›››
page 231,
System limitations .
●
In some situations, the system may incor-
rectly interpret an intended driving ma-
noeuvre as driver tiredness.
●
No warning is given in the event of the ef-
fect called microsleep!
1) WARNING: the
RVC
function button will only be
activated and available when the reverse gear is
engaged or the selector lever is set to position
R .
230