Seat Toledo 2019, Owner'S Manual, Page: 219 / 300

Driver assistance systems
START-STOP ACTIVE
Automatic engine shut
down (Stop phase)
SWITCH OFF IGNI-
TION
Switch the ignition off
START MANUALLY
Start the engine manual-
ly
WARNING
● If the engine is switched off, neither the
brake servo nor the power steering will
work.
●
Do not move the vehicle when the engine
is switched off.
CAUTION
Switch off the Start-Stop system
›››
page 214 before driving through a pool
of water on the road.
Note
●
The battery temperature may reflect
changes in outside temperature after sev-
eral hours. If the vehicle has been stopped
outside at temperatures below zero or in di-
rect sunlight, for example, the battery tem-
perature may take several hours to reach
the values required for the correct operat-
ing of the Start-Stop system.
●
If the Climatronic system is operating au-
tomatically, this could impair automatic
engine shut down under certain conditions.
Cruise control (CCS)*
Control lamp
 It lights up green
The Cruise Control System (GRA) is switched on and
active.
Several warning and control lamps light up
for a few seconds when the ignition is switch-
ed on, signalling that the function is being
verified. They will switch off after a few sec-
onds.
WARNING
Observe the safety warnings
›››
in Con-
trol and warning lamps on page 103 .
Cruise control operation
Fig. 222
Turn signal and main beam headlight
lever: cruise control buttons.
Read the additional information carefully
›››
 page 34
The cruise control system allows you to drive
at a constant speed of 30 km/h (19 mph) or
higher without having to press the accelera-
tor. However, the speed is only maintained
within the margin permitted by the engine
power and the braking effect of the engine.
Setting speed
●
Move knob
1
›››
Fig. 222 to the

position.
●
Briefly press rocker switch
2
in

position
when you have reached the speed you wish
to set.
»
217