Seat Tarraco 2020, Owner'S Manual

Page: 190 / 424

Infotainment System
Configuration for sharing a con-
nection over WLAN
Establishing the connection with the wire-
less network (WLAN)
●
Press the Infotainment button

and then
press the
Settings
menu.
●
Activate the wireless network. To do so,
press the
WLAN
function button.
●
Activate the wireless network (WLAN) on the
device that is to be connected. If necessary,
refer to the manufacturer’s instruction man-
ual.
●
Activate the mobile device assignment on
the Infotainment System. To do so, press the
Enable WLAN connection
button and acti-
vate the checkbox.
●
Enter and confirm the network key dis-
played on the device.
The following settings can also be made on
the menu
Share connection
:
● Security level:
WPA2 encryption auto-
matically generates a network key.
● Network key:
Network key automatically
generated. Press the function button to man-
ually change the network key. The network
key must have a minimum of 8 characters
and a maximum of 63.
● SSID:
WLAN Network name (maximum of
32 characters).
● Do not send network name (SSID):
Activate the checkbox to deactivate the visi-
bility of the wireless (WLAN) network.
The wireless (WLAN) connection is establish-
ed. To complete the connection, it may be
necessary to enter other data into the device.
Repeat this process to connect other devices.
Wi-Fi Protected Setup (WPS) 1)
Wi-Fi Protected Setup can be used to create
a ciphered local wireless network quickly and
simply.
●
Establish the connection with the wireless
network (WLAN)
›››
page 211 .
●
Press the WPS button on the WLAN router
until the warning light on the router starts
flashing. If the WLAN router does not support
WPS the network must be configured man-
ually.
● OR: Press and hold the WLAN button on the
WLAN router until the WLAN light on the router
starts flashing.
●
Press the WPS button on the WLAN device.
The wireless (WLAN) connection is establish-
ed.
Repeat this process to connect other devices.
Configure Internet access
The Infotainment System can use the WLAN
hotspot of an external device to establish an
internet connection.
Establishing the connection with the wire-
less network (WLAN)
●
Activate and check the wireless hotspot on
the external device. If necessary, refer to the
manufacturer’s instruction manual.
●
Press the Infotainment

button and then
press the
Settings
menu; OR access Media
or SEAT Md. Ctrl. and press the
SETTINGS
menu.
●
Press on the menu
WLAN > Enable WLAN
connection and check the verification box.
●
Press the
Find
function button and select
the device you want from the list.
1) This function depends on the equipment and
the country in question.
188