Seat Tarraco 2020, Owner'S Manual

Page: 213 / 424

Operating modes
Note
●
If the Infotainment system cancels a
copying operation, check the storage
space on the internal hard drive and check
the data storage device.
●
Due to copyright laws, before any
change in ownership of the Infotainment
system, all files stored on the jukebox must
be deleted.
●
There are several possible reasons why
files may be shown as inactive (grey): files
that cannot be imported (e.g. images), files
that are already stored in the Jukebox or
files that take up more space than availa-
ble in the internal memory.
Connect an external audio source
via WLAN*
WLAN allows wireless connection between an
external audio source and the Infotainment
system.
To use this connection, the device being con-
nected must have an app compatible with
the UPnP (Universal Plug and Play) communi-
cation protocol.
Conditions
●
Having a compatible (UPnP) app installed
on the device.
● Having the
Enable WLAN connection
op-
tion active, which can be found in the wireless
connection configuration.
●
Pairing the mobile device to the Infotain-
ment system using a password generated by
the system. Pairing must be done from the
device to be connected.
Starting the WLAN audio transfer
●
Start the UPnP app or the app for the play-
back of the WLAN audio source.
●
In the MEDIA main menu, press the
SOURCE
function button and select
WLAN
.
●
Please refer to the instructions on the
screen of the Infotainment system and on the
WLAN audio source regarding the rest of the
procedure.
Controlling playback
The extent to which the WLAN audio can be
controlled via the Infotainment system de-
pends on the connected WLAN device and
the app that is used.
Note
●
The Infotainment system does not pro-
vide an internet connection, it only estab-
lishes a wireless connection between the
mobile device and said system.
●
Via the WLAN, only the connection be-
tween the device and the Infotainment sys-
tem can be guaranteed, its operation de-
pends on the application itself.
WLAN settings
To access the WLAN settings the ignition must
be switched on.
●
Select the Media main menu by pressing
the infotainment key

.
●
Press the
SETTINGS
function button to open
the
Media settings
menu.
●
Press the
WLAN
function button, then the
Share connection over WLAN
button will
appear along with information about the use
of WLAN.
●
Press the function button
Share connec-
tion over WLAN
, then you can
Enable
WLAN connection
and access the WLAN
network
Configuration
.
●
Press the
Configuration
function button
to configure the WLAN network.
Function button: function
Enable WLAN connection
: To turn on/off the WLAN net-
work.
Security level:
WPA2 encryption automatically
generates an 8 character network key.
»
211