14
Audio mode
Depending on the setting selected for the search mode (
SEEK MODE
), the
unit either switches between all available stations or stored stations only
(
SETUP
: see page 35).
●
Briefly press the rocker switch
⇒
fig. 1
SEEK / ...
to the left or right.
Status
Result
Radio mode with
...
dis-
played in the centre line of the
screen
⇒
fig. 4
.
Switches to the next available station on
the current frequency band.
As you go through the stations, the adja-
cent stations are displayed
⇒
fig. 4
.
Radio mode with
...
dis-
played in the centre line of the
screen and
TP
indication.
Switches to the next available traffic news
station (TP function: see page 16).
...
dis-
played in the bottom line of
the screen
⇒
fig. 5
.
Switches to the next stored station (stor-
ing stations: see page 15 onwards).
AM mode: quickly browsing the frequency band
In
AM mode
it is possible to skip stations.
●
Press and hold the
SEEK / ...
rocker switch.
●
When you release the
SEEK / ...
rocker switch, the unit tunes to the
next station it can receive.
Tuning to a station frequency manually
●
Select the desired frequency band
⇒
page 12.
●
Turn the setting knob
⇒
until the desired station frequency
(e.g.
89.9 MHz
) is displayed on the screen.
Scan function (SCAN)
Fig. 6 Additional radio functions and scan function (SCAN) in progress.
When the scan function is running,
all available stations
on the current fre-
quency band are always played in sequence for about 5 seconds each.
If traffic news monitoring is switched on (display:
TP
), the scan function only
tunes to stations that support the TP function
⇒
page 16.
Starting and stopping the scan function
●
Select the desired frequency band in Radio mode
●
Press the setting knob
⇒
fig. 1
10
to start the scan function.
●
Alternatively: Press the
MENU
unit button
⇒
fig. 1
9
and start the scan
function with the
SCAN
function button.
The scan function commences with the following station. The screen dis-
plays the additional functions for Radio mode and the
SCAN
button is un-
derlined
⇒
fig. 6
.
●
Press the setting knob or the
SCAN
function button to stop the scan
function at the station that is currently tuned.
Special case: SEEK MODE
PRESET
Even if the setting for changing stations is the selection of stored stations
only (
SEEK MODE
PRESET
⇒
page 35), after the scan function is stopped,
Summary of Contents for SOUND SYSTEM 2.0
Page 3: ......
