10
Introduction
General operating information
Introduction
Additional information:
●
Safety notes
⇒
page 6
●
Unit overview
⇒
page 8
●
Multi-function steering wheel for changing track or station
⇒
book-
let Operating instructions.
Additional display information
Depending on the vehicle specification, changes to air conditioning set-
tings or information on factory-fitted driver assistance systems may be tem-
porarily displayed on the screen. These displays disappear automatically
when they are no longer required.
All displays appear only after completely restarting the radio system.
CAUTION
Only a small amount of pressure is needed to operate the unit.
Note
●
Never press a button down for longer than 10 minutes. Otherwise the
system will interpret this as a malfunction (button jammed).
●
Due to country-specific legislation, certain functions cannot be selected
on the screen when the vehicle is travelling above a certain speed.
●
Using a mobile phone in the vehicle may cause noise from the vehicle
speakers.
●
In some vehicles equipped with a parking distance warning system, the
volume of the current audio source is automatically lowered when reverse
gear is engaged. This volume can be changed while reverse is engaged. If
the volume is not modified, when reverse is disengaged the previous vol-
ume setting is restored. If the volume is modified, when reverse gear is dis-
engaged the audio source will stay at the set volume and, as long as the
maximum volume is not exceeded, it will be memorised for the next time re-
verse gear is engaged.
Switching on and off
Function
Activation
Switch the unit on or off
manually.
Press the rotary/push knob
After the ignition key is removed the unit
switches off automatically after approx. 30 mi-
nutes (switch-off delay).
Switch on the unit auto-
matically.
Insert the vehicle key into the ignition lock.
The unit switches on automatically if it was on
when the ignition key was removed.
Switch off the unit auto-
matically.
Remove the vehicle key from the ignition lock.
When the unit is switched on the system starts up. The last audio source
used is played at the last selected volume setting, provided this does not
exceed the preselected switch-on volume (
ON-VOL
⇒
page 35).
Energy management
If, when the ignition is switched off and the unit switched on, the battery
voltage falls below the minimum onboard power supply voltage, a signal
sounds and
LOW BATTERY
appears. You should switch the radio off.
If the battery voltage level continues to fall,
LOW BATTERY
and
RADIO OFF
are
briefly shown on the display. The unit will switch off automatically.
Summary of Contents for SOUND SYSTEM 2.0
Page 3: ......
