Radio mode
17
The stations displayed are selected using the corresponding pre-tuning keys
⇒
page 15, “Store and select radio stations”.
Search functions
Radio stations can be selected manually or an automatic search can be
carried out.
Automatic station search
To automatically search for the next or previous station on the same wave-
band, press
or
⇒
page 15 .
The search only stops at stations with good quality reception. These are
shown on the radio display
.
Manual station search - radio mode
After selecting the desired waveband, press the MAN multifunction key; then,
using the search keys
, select the desired frequency. If these buttons are
pressed briefly, the shift is in steps (of 9 KHz on AM and 100 kHz on FM) and
if the buttons are held down, the frequencies change rapidly. In this way it is
possible to tune into stations with a weak signal which can not be found
using the automatic search function.
SCAN function
When the SCAN function is active, all stations with a good reception will be
played for 10 seconds each. To select a station, stop the SCAN function whilst
the required station is being played.
You start and stop the SCAN function by briefly pressing the multifunction key
SCAN
⇒
page 15 .
If the tuned station is already stored, the corresponding pre-tuning button
number will be displayed.
A
1
A
6
A
5
A
4
radio mp3 ingles.book Seite 17 Montag, 23. April 2007 3:40 15