Settings
11
Settings
AUDIO Menu
Using the key AUDIO
you will open an overview of all sound settings that
can be selected
⇒
page 8, fig. 1
.
To select the desired setting, press the corresponding multifunction key. Use
the search keys to start the adjustment of the sound settings:
BASS
(bass settings) /
MID
(mid-range settings) /
TREB
(treble settings).
and the volume distribution:
BAL
(between right and left channels) /
FAD
(between front and rear chan-
nels).
The change of the setting will be shown via a bar in the display
⇒
page 8.
When the multifunction key “reset” is pressed, all the sound settings return
to central position (zero value).
The settings are stored automatically.
The unit will switch back to the original settings after 5 seconds if no altera-
tions are made. The AUDIO menu can also be exited by pressing a function
key or the multifunction key used for the last modified setting.
Sound setting memory
The pre-tuning keys 1....5 can be used to store sound settings
(bass/mid/treb) and volume distribution settings (bal/fad).
Settings and storing
Set the bass, mid, treble, balance and fader as described above. While still in
one of the settings, hold down the pre-tuning button (1....5) where you wish
to store these settings until the confirmation signal is heard.
“Sound 1” appears on the display (if you have selected button 1).
The new settings are stored.
Recall of stored values
Press the SOUND button and then the pre-tuning button where the setting
with the values you wish to recall is stored (for example 3).
“Sound 3” appears on the display.
The stored values become the actual values.
Recall of average values
Press the SOUND key and then pretuning button number 6.
“Sound 6” appears on the display.
Fig. 2 Audio Menu
A
4
A
12
radio mp3 ingles.book Seite 11 Montag, 23. April 2007 3:40 15