Telephone management system (PHONE)
Display and symbols of the telephone
management system
Display: Meaning
A
Name of the mobile network operator (pro-
vider) to which the mobile telephone is con-
nected.
B
View of stored telephone number or name. If
the name stored in the phonebook has an
assigned photo, it can be displayed
Press to
accept
a call.
Press to
end
a call.
OR:
Press to
reject
an incoming call.
Press to mute the call signal during a call
and to reactivate it.
Press to mute the microphone during an ac-
tive call and to reactive it.
This button keeps the call active. While the
call is on hold the listener will not hear the
conversation. To reactivate it, press the call
accept button
. To reject it, press the reject
button
.
Charge status of a mobile telephone connec-
ted via “Hands-free profile” (
HFP
) Blue-
tooth
®
.
Strength of coverage signal received by the
mobile telephone.
Private mode
To activate private mode:
●
Setup
menu.
●
Uncheck the check box:
Hands-free (during an active call)
.
With the private mode activated the active
audio and microphone become that of the
mobile phone connected to the hands-free.
When deactivated, the audio reverts to the
vehicle's audio system. This configuration is
only applicable to the active call, so for sub-
sequent calls, the audio will revert by default
to vehicle's audio system.
Enter telephone number menu
Fig. 51
Enter telephone number menu.
Open the
Enter telephone number menu
Press the
DIAL NUMBER
function button from
the PHONE main menu.
Possible functions
Enter telephone
number
Entering a phone number with the
keypad.
Press the
function button to
make a call.
Select a contact
from the list
Enter the first letters of the contact
to find using the keypad. The avail-
able entries appear in the contact
list.
Search the contact list and press
the desired contact to establish
the connection.
Call mailbox
Press the
Mailbox
function but-
ton to establish the connection.
OR:
Press the
function button
for approx. 2 seconds to establish
the connection.
If the number for the mailbox has
not yet been stored, enter it and
confirm with
OK
.
Redial
Press button
1
and the
last number dialled will be shown
on the display. To place the call,
press button
1
again.
»
61
