Seat NAVI SYSTEM PLUS, Owner'S Manual

Page: 21 / 84

Audio and Media Mode
Manually tuning in a station frequency.
Hiding the fre-
quency band
Briefly press the setting knob
›››
Fig. 1
4
.
Manual frequency selection is also
closed if you select a station with a
station button. If no operation is per-
formed, the frequency range will dis-
appear after a period of inactivity.
Storing stations
Storing the sta-
tion being lis-
tened to on a
preset button
Press and hold the desired preset
button
›››
Fig. 14
until an audible sig-
nal is heard.
The tuned in station will be stored on
this preset button.
Storing stations
Storing a sta-
tion from the
station list to a
preset button
Press the
Station
›››
Fig. 14 function
button to open the station list.
The stations that are already stored
on a preset button are marked on the
station list with the symbol

›››
Fig. 15
.
Select the desired station by press-
ing and holding it on the screen. A
screen will appear to store the sta-
tion on the memory buttons.
Press the preset button where the
station is to be stored.
An audible signal is heard and the
station is stored on the preset but-
ton. To continue storing other sta-
tions from the list, repeat the proc-
ess.
Deleting stored
stations
All the stored stations can be deleted
together or separately from the
FM,
AM, DAB Setup menu
›››
page 21 .
Set a station name (FM frequency range) 1)
In some cases the name of the station is too
long. This text may be blocked/unblocked by
pressing on the station name for 3 seconds
until hearing an audible signal (a dot will ap-
pear/disappear on the left and right of the
station name).
Scan function (SCAN)
When the scan function is active, all availa-
ble stations on the current frequency band
are played in sequence for approximately 5
seconds each.
Starting and stopping the scan function
Starting the scan
function
From the main radio screen, briefly
press the setup button
›››
Fig. 1
4
.
OR:
Press the Setup function button
and then select
SCAN
.
Stopping the
scan function
Press the

function button to
stop the scan function at the station
that is currently playing.
OR:
Briefly press the setup button.
Manually selecting a station with
the preset buttons or changing the
screen also stops the scan function.
Automatic storing of stations
Press and hold the RADIO button for approxi-
mately 10 seconds to carry out the autostore
function to store the radio stations with the
best reception at the present moment. The
stations will be stored on the memory but-
tons.
»
1)
Depends on the market and unit in question.
19