Navigation (NAV)*
101
Representation of maps on the navigation system display
A comprehensive route will be shown graphically on a map on
the display.
– Press the
Map
control button
page 123 from the navigation
menu. The route will be displayed on a map
In addition to the route guidance, you can also display detailed information
about your route on the map. Settings can be entered directly on the map
page 124 and in Navigation Setup
page 131 to display the map.
If you are navigating
without stopovers
, you can select from up to three routes
page 113. Detailed route information is also available.
If you are navigating
with stopovers
, you are shown the entire route with all
stopovers and detailed route information in an overview
You can also use the map as presented in the navigation system display to
enter a destination
Route guidance on the instrument panel display*
After you have entered a route and begun navigating, guidance to your desti-
nation will also be shown on the instrument panel display
(
).
Fig. 117 Navigation:
Example of a map on the
navigation system display
Fig. 118 Instrument
panel display: Example of
route guidance
Fig. 119 Instrument
panel display: Example of
route guidance (turn-off)
media_systemE_EN.book Seite 101 Montag, 21. September 2009 1:48 13