Mobile phone system*
87
•
Storing name tags (consisting of a name and number) in the phone book
for the speech control system
•
Playing the phone book through the speech control system
Once you have saved name tags in the phone book for the speech control
system, you can select them via the speech control system.
Entering data
You should choose spoken names that can be identified clearly by the speech
control system.
Numbers from
ZERO
to
NINE
are recognised when you enter a telephone
number. The telephone number can be specified all at once, in blocks of
digits (separated by a brief pause), or as single digits. After each block of
digits you specify (separated by a brief pause) the system will repeat the
digits. The system does not recognise number combinations (e.g. "twenty-
three") but separate figures (
TWO
,
THREE
). Say the numbers clearly so that
the system can recognise them easily.
If you indicate a number of more than twenty figures, the system will respond:
The number is too long
. A
Plus (+)
can also be placed ahead of the number.
If the system does not recognise a phone book entry, you can play back the
name tags (voice entries) on the speech control system by saying the
command
PLAY PHONE BOOK
. Press the talk button as a name is being read
to select the entry.
The function is not possible
Should the system say
The function is not possible
, please check the status
of the speech control system:
•
Is the navigation system on? Is the ignition switched on?
•
Is the mobile phone connected to the on-board phone system* via Blue-
tooth?
•
Is the mobile phone inserted in the mobile phone adapter*?
•
Is the mobile phone switched on and the PIN entered?
•
Are the phone book entries being loaded from the mobile phone into the
on-board phone system*
media_systemE_EN.book Seite 87 Montag, 21. September 2009 1:48 13
